1. Engine: 29cc single-cylinder air-cooled two-stroke four-point fixed gasoline engine (ROFUN 997 carburetor)
2. Size: 817x480x255mm (LxWxH)
3. The front 395mm/ rear 400mm of the wheel base
4. Wheelbase 570mm
5. Rear wheel drive
6.Rear axle brake
7. 15KG all-metal gear throttle steering gear
8. 60KG metal gear steering gear (plastic case)
9. High quality exhaust pipe
10. Metal differential
11. Second-generation wasteland tyre (second-generation wheel hub with red border)
12. 6mm shock absorption
13. SC6V2000 mah battery
14. 2.4g two-channel remote control
15. 8000RPH clutch
16. The second generation reinforced front and rear suspension
17. New proportioning kettle
Packing List
1X RC Car(With Built-in Battery)
1X Transmitter
1. 29cc single-cylinder air-cooled two-punch four-point fixed gasoline engine
2. Size:LxWxH:31 1/4 x 18 7/8 x11 3/4
3. wheel base front 15 1/2 inches - rear 15 3/4 inches
4. Wheelbase :18 3/4 inches
5. Rear wheel drive
6. Rear axle brake
7. 39.5lb all metal gear throttle steering gear
8. 60G metal gear steering gear (plastic shell)
9. Dominate the exhaust pipe
10. Metal differential
11. Whole earth tire (mesh wheel)
12. 1/4 inchshock absorption
13. SC6V 2000 mah battery
14. 2.4G remote control
15. 8000 RPM clutch
16. the second generation of enhanced front and rear suspension
17. New matching pot
18. Plastic shelf tail wheel kit
19. 9MM replaceable pin type half-shaft
20. CNC metal rear shock bar
21. the new plastic roof decoration board
22. New Nylon Super Strong front anti-collision guard
23. Symmetrical steering
24. New sealing nut
1. Displacement: 36cc single-cylinder air-cooled two-stroke engine with four fixed points (standard with Walbro 1107 carburetor, NGK spark plug)
2. Body length x width x height LxWxH: 33 x 18 3/4 x 11 3/4 inches
3. Wheelbase front 15 1/2 - rear 15 3/4 inches
4. Axle distance 18 5/8 inches
5. Rear-wheel drive
6. Rear axle braking
7. 39lb all-metal gear servos for the throttle
8. 132lb metal gear steering servo
9. Integrated muffler exhaust pipe
10. Metal differential
11. All-terrain tires (high-strength nylon fourth-generation hubs, sealed nuts)
12. CNC 5/16 inch metal shock absorbers
13. SC6V 2000mAh battery
14. New BER-TRC4 LCD display remote control
15. 8000 rpm wear-resistant clutch
16. Reinforced high-strength nylon front and rear suspension
17. New style mixing bottle
18. 3/8 inch half shafts
19. Metal clutch tripod
20. CNC metal rear shock crossbar
21. Symmetrical steering
22. New integrated hexagonal clutch cup kit
23. Integrated dual rear wheel anti-collision kit
24. All super high-strength aluminum & nylon parts.
25. Tool kit included with the vehicle
26. Vehicle oil kit: shock oil, differential oil, air filter oil
1. 36cc Single Cylinder Air-Cooled Two-Stroke Four-Point Fixed Dual-Ring Gasoline Engine (Equipped with Walbro1107 Carburetor, NGK Spark Plug).
2. Dimensions (L x W x H): 32 1/8 x 18 7/8 x 10 1/8 inches.
3. Front Wheelbase: 395mm, Rear Wheelbase:15 3/4 inches.
4. Wheelbase: 570mm.
5. Rear-Wheel Drive.
6. Rear-Wheel Axle Brake.
7. 39.5lb All-Metal Gear Throttle Servo.
8. 132lb Metal Gear Steering Servo (Plastic Shell).
9. Dominator Exhaust Pipe.
10. Metal Differential Case.
11. All-Terrain Tires (Treaded Spoke Wheel Hub, Sealed Nuts).
12. 8mm Metal Shock Absorber.
13. SC 6V 2000mAh Battery.
14. 6-Channel 2.4G Remote Controller.
15. 8000RPM Wear-Resistant Clutch.
16. Generation II Reinforced Front and Rear Suspension.
17. New Ratio Pot.
18. Front and Rear Anti-Roll Bar Set for the Entire Vehicle.
19. 9mm Half Shaft (Dog Bone).
20. Metal Clutch Triangle Bracket.
21. Metal Roll Cage.
22. Symmetrical Steering.
23. Emergency Repair Kit included.
24. CNC Rear Shock Absorber Bracket Crossbar.
1. Engine: 36cc Single-Cylinder Air-Cooled 2-Stroke 4-Point Fixed Dual-Ring Gasoline Engine (Walbro 1107 Carburetor, NGK Spark Plug)
2. Vehicle Dimensions (LxWxH): 32 1/8 x 18 7/8 x 10 1/8 inches
3. Wheelbase Front 15 1/2 - Rear 15 3/4 inches
4. Axle Distance: 22 1/2 inches
5. Rear-Wheel Drive
6. Rear-Wheel Axle Brake
7. 39.5lb All-Metal Gear Throttle Servo
8. 132lb Metal Gear Steering Servo
9. Integrated Silenced Dominator Exhaust Pipe
10. Metal Differential
11. All-Terrain Tires (Five-Spoke High-Strength Nylon Wheel Hubs, Sealed Nuts)
12. 8mm Metal Shock Absorbers
13. SC6V 2000mAh Battery
14. 6-Channel 2.4G Remote Controller
15. 8000 RPM Wear-Resistant Clutch
16. Enhanced High-Strength Nylon Front and Rear Suspension
17. New Ratio Pot
18. Front and Rear Anti-Roll Bar Set for the Entire Vehicle
19. 9mm Half-Shafts (Dog Bones)
20. Metal Clutch Triangle Bracket
21. Entire Vehicle Made of High-Strength Nylon Parts
22. Symmetrical Steering
23. New Type Integrated Hexagonal Clutch Cup Kit
24. Emergency Repair Kit Included with the Vehicle
25. Included Oil Bag: Shock Absorber Oil, Differential Oil, Air Filter Oil
26. CNC Metal Rear Shock Absorber Support Cross Bar
1. ROFUN 36cc single-cylinder dual-loop air-cooled two-stroke fixed-point gasoline engine
2. Dimensions (LxWxH): 850mm x 470mm x 320mm
3. Wheelbase: 15 3/4 inches
4. Axle Distance: 570mm
5. 5mm CNC integrated hard anodized aluminum alloy chassis
6. 4WD shaft drive system, 7mm front short drive shaft, 7mm rear long drive shaft
7. Front and rear metal differentials, middle straight drive large gear
8. Front and rear disc brake with clutch
9. CNC middle straight drive large gear metal bracket
10. Metal clutch cup support cover
11. 8000 RPM wear-resistant clutch
12. Integrated clutch cup
13. Front and rear 7mm hydraulic shock absorbers
14. D5/T5 small spike tires (sealed hub)
15. New BER-TRC4 LCD display remote controller
16. 6V SC4500mAh nickel-metal hydride battery
17. 40KG digital metal gear throttle servo (CNC metal double-sided straight arm)
18. 40KG digital metal gear steering servo X2, dual servo structure (CNC servo arm)
19. Stainless steel exhaust pipe
20. 700ml large-capacity injection-molded transparent oil bottle
21. PC material shell
22. Front and rear collision protection
23. New ratio pot
1, Enine: 45CC double ring super easy to start engine (Walbro1107 carburetor, NGK spark plug)
2, LxWxH: 32 1/8 x 18 7/8 x 10 1/8 inches
3, Wheel base front 15 1/2 - rear 15 3/4 inches.
4, wheelbase 570mm
5. Rear wheel drive
6. Rear axle brake
7, 25KG hollow cup full metal gear throttle steering gear (with CNC metal steering gear rocker arm)
8, 75KG digital metal gear steering gear (with CNC metal steering gear rocker arm)
9, double row noise exhaust pipe (including metal after collision)
10, metal differential
11, the second generation of the whole earth tire (mesh wheel dome seal nut)
12, CNC metal 8mm shock absorption
13, 6V 4500 mah battery
14, Heaven and Earth fly X9S color LCD display 9-channel remote control
15, 8000 wear-resistant clutch
16, the whole car front and rear anti-tilt rod
17, the new enhanced 9mm shaft
18, metal clutch tripod
19, metal anti-roll rack
20, CNC metal symmetric steering (CNC metal rod)
21. Emergency maintenance kit is included with the car
22, car oil package: shock absorption oil, differential oil, air filter oil
23, new matching pot
24. New integrated hexagonal clutch cup kit
25. CNC metal front and rear suspension
26, CNC metal front shock absorber support tower (general 5T/5SC)
27. CNC metal front and rear thickened second floor slab
28, CNC rear shock absorber support bar
29, CNC metal rear shock absorber bracket, pull rod
30, CNC metal spherical joint
31. CNC metal front and rear wheel bearing seats
32, CNC metal rear lamp holder LED lights
33, CNC metal front lamp holder LED lights
34, CNC metal roof decoration plate
35. New oil-proof oil can
36, net weight: 14kg gross weight: 18 kg
1. Power: 45CC Dual-Ring Super Easy Start Engine (equipped with Walbro1107 carburetor, NGK spark plug).
2. Dimensions (L x W x H): 817x480x255mm.
3. Front wheelbase: 395mm, Rear wheelbase: 400mm.
4. Wheelbase: 570mm.
5. Rear-wheel drive.
6. Rear-wheel axle brake.
7. 18KG all-metal gear throttle servo.
8. 60KG metal gear steering servo.
9. Integrated Muffler Generation II Dominator Exhaust Pipe.
10. Metal differential.
11. Generation II All-terrain Tires (Treaded wheel hub, high-strength nylon frame).
12. CNC metal 8mm shock absorber.
13. 6V 4500mAh battery.
14. X4 2.4G LED screen 4-channel remote controller.
15. 8000 RPM wear-resistant clutch.
16. Front and rear anti-roll bars on the whole vehicle.
17. 9mm half shaft (dog bone).
18. Metal clutch triangle bracket.
19. Metal roll cage.
20. Strengthened high-strength nylon front and rear suspension.
21. Emergency repair kit included.
22. New type integrated hexagonal clutch cup kit.
23. CNC metal front shock absorber support tower (universal for 5T and 5SC).
24. CNC metal front and rear thickened second floor.
25. CNC rear shock absorber bracket crossbar.
26. CNC metal rear shock absorber bracket, pull rod.
29. New sealed tire nuts.
1. 32cc two-stroke four point fixed gasoline engine
2. Body length x width x height LxWxH: 970x440x340mm
3. 395mm in front of the wheelbase and 400mm in back
4. Wheelbase 570mm
5. Rear wheel drive
6. Rear axle braking
7. 18KG metal gear throttle servo
8. 60KG metal gear steering servo
9. Dominator exhaust pipe
10. Metal differential housing
11. 5T/5SC third-generation highway tires
12. 6mm plastic shock absorber
13. SC6V2000 mAh battery
14. Non LCD 2.4G Six Channel Remote Control RC-X6
15. 8000 RPM wear-resistant clutch
16. Second generation reinforced front and rear suspension
17. Front and rear anti roll bars
18. 9mm half shaft (dog bone)
19. Metal clutch tripod
20. Symmetric steering
21. New closed nuts
22. New proportioning kettle
23. Net weight: 13.5kg
24. Gross weight: 18.5kg
25. Outer packaging size LxWxH: 990x500x370mm
1.ROFUN BAHA 5T-MAX 1/5 Sales 45cc 2 Stroke 4 Bolt Gasoline Engines for Rovan Baja 5t-max Rc Car Game Toys
cylinder bore * stroke: 43x31 / mm
Engine displacement: 44.99/cm3
Carburetor: Walbro 1107
Spark plug: NGK CMR7H
Start mode: Easy to start hand pullback
Idle speed: 4500±200/rpm
No load maximum speed: 17000/rpm
Maximum power: 3.2/11000 kW/rpm
Maximum torque: 2.8/9000 N·m/rpm
Clutch speed: 8000/rpm
2.Size LxWxH: 1000x785x360 mm
3. 660mm front / 670mm rear
4. Wheelbase 580 mm
5. Rear-wheel drive
6. Rear wheel axle brake
7. 18KG kg metal throttle servo
8. 55KG metal gear steering servo
9. The second generation dominator
10. Metal differential
11. Herringbone tire (200 * 120)
12. CNC metal 10mm shock absorption
13. SC64500 mAh battery
14. GT3B 2.4G LED screen 3-channel remote control
15, 8000 rpm wear-resistant clutch
17. New Proportioning Pot
18. BAHA-MAX conversion kit
19. Metal clutch tripod
20. New symmetrical steering
21. An emergency repair kit is included with the vehicle
22. Integrated hexagon clutch cup kit
23. PC material car shell
24. CNC metal front and rear second floor
25. CNC metal rear shock absorber bracket
26. CNC metal rod
1. 45cc single-cylinder air-cooled two-stroke fixed gasoline engine (equipped with Walbro 1107 carburetor, NGK spark plug)
2. Dimensions (LxWxH): 880mm x 780mm x 450mm
3. Front Wheelbase: 660mm, Rear Wheelbase: 670mm
4. Axle Distance: 580mm
5. Rear-wheel drive
6. Rear-wheel axle brake
7. 18KG metal throttle servo
8. 55KG metal gear steering servo
9. Dual-exhaust silencer (including metal rear bumper)
10. Metal differential
11. Chevron tires (200mm x 120mm)
12. CNC metal 10mm shock absorbers
13. SC6V 4500mAh battery
14. BER 2.4G LED screen 3-channel remote controller
15. 8000 RPM wear-resistant clutch
17. New ratio pot
19. Metal clutch cup support frame
20. New symmetric steering
21. Included emergency repair kit
22. Included oil package: shock absorber oil, differential oil, air filter oil
23. Integrated hexagonal clutch cup kit
24. 5TS metal cage kit shell
25. CNC metal front and rear second-floor plates
26. CNC metal rear shock absorber support
27. CNC metal tie rod
28. BAJA-MAX modification kit
29. Metal front bumper
30. Metal rear bumper
31. New sealed tire nuts
1. ROFUN 36CC single-cylinder double-ring air-cooled two-punch four-point fixed gasoline engine
2. Size:LxWxH:860x480x350mm
3. Wheel base: 400 mm
4. wheelbase: 570 mm
5. 5mmCNC integrated forming 6061T6 aluminum alloy chassis
6. 4WD shaft transmission system, 7mm front short drive shaft, 7mm rear long drive shaft
7. Front and rear metal differential, medium and straight transmission teeth
8. front and rear clip type four disc brake
9. CNC direct transmission big tooth metal bracket
10. metal clutch cup support cover
11. 8000 wear-resistant clutch
12. one clutch cup
13. 7mm hydraulic shock
14. D5/T5 small nail tire (sealed hub)
15. New BER-TRC4 LCD remote control
16. 6V SC4500 mah NIMH battery
17. 40KG digital metal gear throttle steering gear (CNC metal double-sided steering gear arm)
18. 40KG digital metal gear steering gear X2 double steering gear structure (CNC steering gear arm)
19. stainless steel exhaust pipe
20. 700ml large capacity injection transparent oil pot
21. PC material integrated car shell,
22. packaging size: 1000x560x365 mm
23. net weight: 17 kg; Gross weight: 22 kg
1. 32cc Single Cylinder Air-Cooled Two-Stroke Four-Point Fixed Gasoline Engine.
2. Dimensions (Length x Width x Height): 970x440x340mm.
3. Front Wheelbase: 395mm, Rear Wheelbase: 400mm.
4. Wheelbase: 570mm.
5. Rear-Wheel Drive.
6. Rear-Wheel Axle Brake.
7. 18KG All-Metal Gear Throttle Servo.
8. 60KG Metal Gear Steering Servo (Plastic Version).
9. Dominator Exhaust Pipe.
10. Metal Differential.
11. 5T/5SC Large Spike Tires (Five-Spoke Wheel Hub).
12. 6mm Shock Absorber.
13. SC 6V 2000mAh Battery.
14. 9mm Half Shaft (Dog Bone).
15. 6-Channel 2.4G Remote Controller.
16. Generation II Reinforced Front and Rear Suspension.
17. 8000 RPM Wear-Resistant Clutch.
18. Metal Clutch Triangle Bracket.
19. PC Material Car Shell.
20. Symmetrical Steering.
23. Compatible with Dominator SC Rear Bumper.
24. New Ratio Pot.
25. 5SC Front Axle.
26. New Sealed Nuts.
These cars and trucks are not suggested for persons under 18 years of age without parental guidance. 1/5 Scale Gasoline RC vehicles can cause serious burns from the exhaust and engine. Be mindful of observers, children, and animals, as they can sustain severe injury or death if impacted by the vehicle.